Xerox 665 System Administrator Manual page 298

Xerox printer/fax/scanner/copier system administrator's guide

Hide thumbs Also See for 665:

Table of Contents

11. Align the four hooks on the new Toner Cartridge with the slots on

the Developer Assembly. Fit the cartridge to the assembly. The

following figure shows how the Toner Cartridge and the

Developer Assembly connect.

Toner Cartridge

12. Move the cartridge to the right until the button on the left of the

Developer Assembly clicks into place.

13. Holding the Developer Assembly with one hand, grasp the edge

of the protective strip under the toner housing. Pull the Strip firmly

to completely remove it from the cartridge.

WorkCentre Pro 665/685/765/785

Troubleshooting