Xerox 665 System Administrator Manual page 56

Programming the Machine
2-36
3. Using the Keyboard and Numeric Keypad, enter the name to
assign to the Master Department, then press Enter.
After 2 seconds
4. Using the Numeric Keypad, enter the 5-digit master code to
assign to the Master Department, then press Enter.
Note: The 5-digit Master Code is required to access the
Department Code feature to perform any modifications.
Please remember your Master Code.
5. The Master Department Code entry is completed. To setup
individual Department Codes, go to step 6. To exit this feature,
press Stop .
6. Enter a number between 2 and 99 to assign to this Department,
then press Enter.
Enter master code
Dept. number:
SERVICE
Enter master code
Dept. number:
Master code:
Set dept. code
Dept. number (1-99):
WorkCentre Pro 665/685/765/785
01
01