One Time Fax Options - Xerox 665 System Administrator Manual

Transmitting Documents

One Time Fax Options

5-18
Before sending a document, you can set up various options that
effect only the current job. With the document in the Document Tray,
set each option you want to apply to that job, then using one of the
dialing methods, send the fax. The following options can be set for an
individual transmission:
Option Description
Number of Prints the designated number of pages at the top of the
Pages recording paper for Direct Send Transmissions only.
Listen to Dial Turns the speaker ON to monitor the line tones.
ECM Disable When the ECM default mode is set to On, allows you to
disable ECM for the current transmission .
Send then Sends a document, then polls a document from the remote
Poll machine during the same transmission.
Secure Send The WorkCentre compares the number you dialed with the
Transmission remote machine's ID. If the numbers do not match, the
document is not sent.
Send After Once the Send After Scan Mode Default Setting is set to
Scan Off, this feature allows you enable the Send After Scan
mode for a single transmission.
WorkCentre Pro 665/685/765/785