Xerox 665 System Administrator Manual page 149

WorkCentre Pro 665/685/765/785
To perform a ITU-T Relay Transmission:
1. Load the document face down in the Document Tray.
2. Select the desired Resolution and Contrast .
3. Press:
Mailbox
4. Using the Numeric Keypad enter a relay box number, then press
Enter .
Note: A Password is required receive to a Relay Box.
5. Select the Password option:
To assign a password, press
If you do not want to assign a password, press
step 7.
6. Using the Numeric Keypad, enter the password you want to
assign to this box, then press Enter .
Transmitting Documents
Send (Relay)
Box number (20 max):
Setup password
1. Yes
2. No
and go to step 6.
Enter password
Password (20 max):
and go to
5-35