WorkCentre Pro 665/685/765/785
19. To add a password to the sub address,
press
to select PWD; or to exit this option, go to step 20.
20. Enter the numeric remote sub address password, then press
Enter.
21. To exit the sub address option, press
22. To add an additional option, go to step 7. To exit, press
go to step 25.
Line Selection**
23. To select either line, press
To select Line #1, press
To select Line #2, press
24. To add an additional option, go to step7. To exit, press
go to step 25 to complete the procedure.
25. To assign additional One Touch numbers, repeat steps 2-24.
26. When you have completed the One Touch Key assignments,
press Exit or Stop to return to the Standby Mode.
** Not available on some models.
Programming the Machine
Subaddress
PWD (20 max):
.
.
.
.
and
and
2-27