Removing The Fork Legs; Installing The Fork Legs - GAS GAS TXT Racing 125 2020 Owner's Manual

11.4

Removing the fork legs

11.5

Installing the fork legs

Warning
Danger of accidents Oil or grease on the brake discs
reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when neces-
sary.
–
Clean and oil the dust boots and inside fork tubes of both fork legs.
Universal oil spray (
–
Press the dust boots back into the installation position.
–
Remove the excess oil.
Finishing work
–
Remove the motorcycle from the lift stand. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove front brake disc guard.
–
Remove front brake caliper.
–
Remove the front fender. (
–
Remove the headlight mask. (
Main work
–
1
Loosen screws
sliding the brake line guide
–
3
Loosen screws
E01412-10
Main work
–
Position the left fork leg while carefully pushing the brake line
1
guide onto the fork leg.
–
2
Tighten screw
Guideline
Screw, top triple clamp
–
Tighten screws
Guideline
E01412-11
Screw, bottom triple
clamp
–
Position the right fork leg.
–
4
Tighten screw
SERVICE WORK ON THE CHASSIS 11
p. 113)
p. 38)
( p. 75)
( p. 62)
( p. 62)
p. 46)
p. 45)
. Remove the fork leg on the left while carefully
2
from the fork leg.
. Remove the right fork leg.
.
M6 12 Nm (8.9 lbf ft)
3
.
M6 10 Nm (7.4 lbf ft)
.
p. 38)
39