13.1
Removing the front wheel
13.2
Installing the front wheel
Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
1
Loosen screw
–
Loosen wheel spindle
–
Press the left-hand side of wheel spindle
dle out of the axle clamp.
Warning
Danger of accidents Damaged brake discs reduce the
E01389-12
braking effect.
–
Always lay the wheel down in such a way that the brake
disc is not damaged.
–
Hold front wheel and remove wheel spindle. Take the front wheel
out of the fork.
Info
Do not actuate the hand brake lever when the front wheel is
removed.
–
Check the wheel bearing for damage and wear.
»
If the wheel bearing is damaged or worn:
–
Change front wheel bearing.
–
Clean and grease the wheel spindle.
Long-life grease (
–
Jack up the front wheel into the fork, position it, and insert the
wheel spindle.
The brake linings are correctly positioned.
H00935-18
–
Tighten wheel spindle
Guideline
Wheel spindle, front
–
Operate the hand brake lever several times until the brake linings
are seated correctly against the brake disc.
–
Remove the motorcycle from the lift stand. (
–
Operate the front brake and compress the fork a few times firmly.
The fork legs straighten.
E01389-11
–
2
Tighten screw
p. 38)
by several rotations.
2
.
2
to push the wheel spin-
p. 112)
1
.
M18
50 Nm (36.9 lbf ft)
p. 38)
.
WHEELS, TIRES 13
75