Riding Instructions 8; Checks And Maintenance Measures When Preparing For Use; Starting - GAS GAS TXT Racing 125 2020 Owner's Manual

Table of Contents

8.1

Checks and maintenance measures when preparing for use

Info

Before every trip, check the condition of the vehicle and ensure that it is safe to operate.

The vehicle must be in perfect technical condition when it is being operated.

8.2

Starting

Danger

Danger of poisoning Exhaust gases are toxic and inhaling them may result in unconsciousness and death.

–

Always make sure there is sufficient ventilation when running the engine.

–

Use effective exhaust extraction when starting or running the engine in an enclosed space.

Note

Engine damage High revving speed with a cold engine negatively impacts the lifespan of the engine.

–

Always run the engine warm at a low speed.

Info

If the motorcycle is unwilling to start, the cause can be old fuel in the float chamber. The flammable elements of the

fuel evaporate after a long time of standing.

If the float chamber is filled with fresh fuel, the engine starts immediately.

–

Check the gear oil level. (

–

Check the electrical system.

–

Check the front brake fluid level. (

–

Check the rear brake fluid level. (

–

Check the front brake linings. (

–

Check the brake linings of the rear brake. (

–

Check that the brake system is functioning properly.

–

Check the antifreeze and coolant level. (

H02217-01

–

Check the chain for dirt. (

–

Check the chain tension. (

–

Check the tire condition. (

–

Check the tire pressure. (

–

Check the spoke tension. (

Info

The spoke tension must be checked regularly as incorrect

spoke tension will strongly impair riding safety.

–

Clean the dust boots of the fork legs. (

–

Check the air filter.

–

Check the settings of all controls and ensure that they can be oper-

ated smoothly.

–

Check all screws, nuts, and hose clips regularly for tightness.

–

Check the fuel level.

The motorcycle has been out of use for more than 1 week

–

Empty the carburetor float chamber.

–

Turn tap handle of the fuel tap to the ON position.