11 SERVICE WORK ON THE CHASSIS
60
–
Now press the fluid into the system until it emerges from hole
of the master cylinder without bubbles.
–
Occasionally extract the fluid from the master cylinder reservoir to
prevent overflowing.
–
Remove the bleeding syringe. Tighten the bleeder screw. Mount the
protection cap.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container rim
E01366-10
–
2
Position cover
1
screws
.
4 mm (0.16 in)
with the membrane. Mount and tighten
4