–
8
Remove screw
–
Carefully remove the brake caliper from the link fork.
E01381-10
–
Remove clamping spring
–
Push back brake piston and remove brake linings.
–
Clean brake caliper.
E01382-10
–
Insert the new brake linings.
Info
Always change the brake linings in pairs.
–
Mount clamping spring
clamping spring is locked in groove
–
Position the brake caliper on the link fork and mount and tighten
8
screw
.
E01383-10
Guideline
Screw, rear brake
caliper
–
Add brake fluid to level
Brake fluid DOT 4 / DOT 5.1 (
–
6
Position cover
5
screws
.
Info
Use water to immediately clean up any brake fluid that has
overflowed or spilled.
E01377-12
–
Position the foot brake cylinder.
–
Mount and tighten screws
Guideline
Screw, foot brake cylin-
der
E01399-10
.
9
to the right.
9
from the right and make sure that the
A
.
M6
12 Nm (8.9 lbf ft)
B
.
p. 110)
7
with membrane
and mount and tighten
3
with plastic bushing
M6
10 Nm (7.4 lbf ft)
BRAKE SYSTEM 12
4
.
73