Table of Contents
Advertisement
11.39
Changing the hydraulic clutch fluid
Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with the appli-
cable regulations.
Info
Do not use brake fluid.
–
Move the hydraulic clutch fluid reservoir mounted on the handlebar
into a horizontal position.
–
Remove screws
–
2
Take off cover
–
Check the fluid level.
Fluid level below container rim
»
If the level of the fluid does not meet specifications:
–
Correct the fluid level of the hydraulic clutch.
E01364-10
Hydraulic fluid (15) (
–
2
Position cover
1
screws
.
–
Move the hydraulic clutch fluid reservoir mounted on the handlebar
into a horizontal position.
–
Remove screws
–
2
Take off cover
E01364-10
–
Fill the bleeding syringe with the appropriate hydraulic fluid.
Hydraulic fluid (15) (
–
On the clutch slave cylinder, remove the protection cap, release
3
bleeder screw
E01365-10
SERVICE WORK ON THE CHASSIS 11
1
.
with membrane.
4 mm (0.16 in)
p. 111)
with the membrane. Mount and tighten
1
.
with membrane.
p. 111)
and mount the bleeding syringe.
59
Advertisement
Table of Contents
