Table of Contents
Advertisement
12 BRAKE SYSTEM
70
Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with the appli-
cable regulations.
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not designed for
DOT 5 brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
Preparatory work
–
Check the brake linings of the rear brake. (
Main work
–
1
Remove screw
–
Pull the push rod out of the foot brake cylinder and remove the foot
brake lever to the front.
E01398-10
–
Remove screws
–
Carefully remove the brake cylinder and hold it vertically.
E01399-10
–
Remove screws
E01400-10
–
Add brake fluid up to the marking
Brake fluid DOT 4 / DOT 5.1 (
–
6
Position cover
5
screws
.
Info
Use water to immediately clean up any brake fluid that has
overflowed or spilled.
E01377-11
–
Position the foot brake cylinder.
p. 71)
2
with nut
.
3
4
with plastic bushing
.
5
6
and cover
with membrane
A
.
p. 110)
7
with membrane
and mount and tighten
7
.
Advertisement
Table of Contents
