Table of Contents
Advertisement
16 TUNING THE ENGINE
16.1
16.2
86
Checking the throttle cable play
400192-11
Adjusting the throttle cable play
E01401-10
400192-11
–
Check the throttle grip for smooth operation.
–
Move the handlebar to the straight-ahead position. Turn the throt-
tle grip back and forth slightly and determine the play in throttle
A
cable
.
Throttle cable play
»
If the throttle cable play does not meet specifications:
–
Adjust the throttle cable play.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling
them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation when
running the engine.
–
Use effective exhaust extraction when starting or run-
ning the engine in an enclosed space.
–
Start the engine and let it run at idle speed. Move the handlebar to
and fro over the entire steering range.
The idle speed must not change.
»
If the idle speed changes:
–
Adjust the throttle cable play.
Main work
–
Move the handlebar to the straight-ahead position.
–
1
Push back sleeve
.
–
Ensure that the throttle cable sleeve is pushed all the way into bar-
2
rel adjuster
.
–
3
Loosen nut
.
–
2
Turn barrel adjuster
so that there is play
cable at the throttle grip.
Guideline
Throttle cable play
–
3
Tighten nut
.
–
1
Slide on sleeve
.
Finishing work
–
Check the throttle grip for smooth operation.
–
Check the throttle cable play. (
2 ... 3 mm (0.08 ... 0.12 in)
(
p. 86)
(
p. 86)
A
in the throttle
2 ... 3 mm (0.08 ... 0.12 in)
p. 86)
Advertisement
Table of Contents
