13.4
Installing the rear wheel
Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
Main work
–
Check the wheel bearing for damage and wear.
»
If the wheel bearing is damaged or worn:
–
Change the rear wheel bearing.
–
Clean and grease shaft seal rings
spacers.
Long-life grease (
–
Insert the spacers.
H03001-10
–
Lift the rear wheel into the link fork, position it, and insert wheel
2
spindle
with eccentric
–
Mount the chain.
The brake linings are correctly positioned.
E01387-11
–
4
Mount screw
–
Operate the foot brake lever repeatedly until the brake linings are in
contact with the brake disc and there is a pressure point.
E01384-11
1
and contact surfaces
p. 112)
3
.
5
with spacer
, but do not tighten yet.
WHEELS, TIRES 13
A
of the
77