Installing The Fork Protector; Removing The Fork Legs - GAS GAS EC 350F Owner's Manual

12 SERVICE WORK ON THE CHASSIS
12.6
12.7
50

Installing the fork protector

F03179-11

Removing the fork legs

F03180-10
F03182-10
–
Position the fork protector on left fork leg. Mount and tighten
1
screws .
Guideline
Remaining screws,
chassis
–
Position the brake line, the wiring harness, and the clamp. Mount
2
and tighten screws .
Guideline
Screw, brake line
bracket
–
Position the fork protector on the right fork leg. Mount and tighten
3
screws .
Guideline
Remaining screws,
chassis
Preparatory work
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
1
Remove screws and take off the clamp.
–
Remove the cable ties.
–
2
Remove screws and take off the brake caliper.
–
Allow the brake caliper and the brake line to hang loosely to the
side.
–
3
Loosen screws . Remove the left fork leg.
–
4
Loosen screws . Remove the right fork leg.
M6 10 Nm (7.4 lbf ft)
EJOT 1.7 Nm (1.25 lbf ft)
M6 10 Nm (7.4 lbf ft)
p. 101)
p. 48)
( p. 89)