Condition
The engine is cold.
–
Position the motorcycle upright.
–
Place an appropriate container under the water pump cover.
–
Remove radiator cap screw
–
2
Remove screw
–
Completely drain the coolant.
–
Mount and tighten screw
Guideline
Coolant drain plug
–
Completely fill the radiator with coolant and mount and tighten radi-
1
ator cap screw
Coolant (
p. 110)
Danger
Danger of poisoning Exhaust gases are toxic and inhaling
them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation when
running the engine.
E01391-10
–
Use effective exhaust extraction when starting or run-
ning the engine in an enclosed space.
–
Allow the engine to warm up and cool down again.
–
Check the antifreeze and coolant level. (
COOLING SYSTEM 15
1
.
.
2
with a new seal ring.
M6
10 Nm (7.4 lbf ft)
.
p. 82)
85