Adjusting The Free Travel Of The Clutch Lever; Adjusting The Basic Position Of The Clutch Lever; Checking/Correcting The Fluid Level Of Hydraulic Clutch - GAS GAS TXT Racing 125 2020 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.36
11.37
11.38
58

Adjusting the free travel of the clutch lever

Adjusting the basic position of the clutch lever

Checking/correcting the fluid level of hydraulic clutch

Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with the appli-
cable regulations.
Info
The fluid level rises with increasing wear of the clutch facing discs.
Do not use brake fluid.
–
Check the free travel of the clutch lever. (
–
1
Loosen nut .
–
Adjust the free travel of the clutch lever with adjusting screw
Info
Turn the adjusting screw clockwise to reduce free travel. The
pressure point moves away from the handlebar.
Turn the adjusting screw counterclockwise to increase free
travel. The pressure point moves towards the handlebar.
E01363-13
The range of adjustment is limited.
Do not use force.
Do not make any adjustments while riding.
–
Hold adjusting screw
Main work
–
Adjust the basic position of the clutch lever to your hand size by
turning adjusting screw
Info
Turn the adjusting screw counterclockwise to decrease the
distance between the clutch lever and the handlebar.
Turn the adjusting screw clockwise to increase the distance
between the clutch lever and the handlebar.
The range of adjustment is limited.
E01363-11
Do not use force.
Do not make any adjustments while riding.
Finishing work
–
Check the free travel of the clutch lever. (
p. 57)
2 1
and tighten nut .
1
.
p. 57)
2
.