Installing The Main Silencer; Removing The Fuel Tank - GAS GAS TXT Racing 125 2020 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.25
11.26
52

Installing the main silencer

Removing the fuel tank

Danger
Fire hazard Fuel is highly flammable.
The fuel in the fuel tank expands when warm and can escape if overfilled.
–
Do not fuel the vehicle in the vicinity of open flames or lit cigarettes.
–
Switch off the engine for refueling.
–
Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.
–
If any fuel is spilled, wipe it off immediately.
–
Observe the specifications for refueling.
Main work
–
Position the shock absorber and mount screw
tighten it yet.
–
2
Mount screw
–
4
Mount screw
–
5
Mount screw
–
Shake the main silencer slightly to avoid strain.
–
1
Tighten screw
E01378-11
Guideline
Screw, top shock
absorber
–
2
Tighten screw
Guideline
Screw, main silencer
–
Tighten screws
Guideline
Screw, foot brake cylin-
der
–
Tighten screws
Guideline
Screw, manifold
E01379-11
Finishing work
–
Install the air filter box.
–
Install the fuel tank. (
1
3
with nut but do not tighten it yet.
with the spacer, but do not tighten yet.
, but do not tighten yet.
.
M10 50 Nm (36.9 lbf ft)
.
M6 12 Nm (8.9 lbf ft)
4 5
and .
M6 10 Nm (7.4 lbf ft)
6
.
M8 12 Nm (8.9 lbf ft)
( p. 48)
p. 53)
, but do not