Table of Contents
Advertisement
15 COOLING SYSTEM
15.1
15.2
82
Cooling system
Checking the antifreeze and coolant level
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
–
Do not open the radiator, the radiator hoses or other cooling system components if the engine or the cooling
system are at operating temperature.
–
Allow the cooling system and the engine to cool down before you open the radiator, the radiator hoses or
other components of the cooling system.
–
In the event of scalding, rinse the area affected immediately with lukewarm water.
Warning
Danger of poisoning Coolant is toxic and a health hazard.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.
1
Water pump
in the engine ensures forced circulation of the coolant.
The pressure in the cooling system resulting from heat is regulated by a
2
valve
in the radiator.
E01394-10
Condition
The engine is cold.
–
Stand the motorcycle upright on a horizontal surface.
–
Remove radiator cap screw
–
Check the antifreeze in the coolant.
−25 ... −45 °C (−13 ... −49 °F)
»
If the antifreeze in the coolant does not match the specified
value:
–
Correct the antifreeze in the coolant.
E01390-10
1
.
Advertisement
Table of Contents
