12.12
Checking brake discs
Warning
Danger of accidents Worn-out brake discs reduce the braking effect.
–
Make sure that worn-out brake discs are replaced immediately. (Your authorized GASGAS Motorcycles work-
shop will be glad to help.)
Guideline
A
Level
(brake fluid level
below reservoir rim)
Brake fluid DOT 4 / DOT 5.1 (
–
2
Position cover
1
screws
.
Info
Use water to immediately clean up any brake fluid that has
overflowed or spilled.
Finishing work
–
Install the front brake caliper.
–
Install the brake disc guard at the front.
Condition
Preparatory work
–
Remove front brake disc guard.
Main work
–
Check front and rear brake disc thickness at multiple points for the
A
dimension
.
Info
Wear reduces the thickness of the brake disc around the
contact surface of the brake linings.
Brake discs - wear limit
400257-10
front
rear
»
If the brake disc thickness is less than the specified value:
–
Change the front brake disc.
–
Change the rear brake disc.
–
Check front and rear brake discs for damage, cracking, and deforma-
tion.
»
If the brake disc exhibits damage, cracking, or deformation:
–
Change the front brake disc.
–
Change the rear brake disc.
Finishing work
–
Install the brake disc guard at the front.
5 mm (0.2 in)
p. 110)
with the membrane. Mount and tighten
(
p. 62)
(
p. 62)
(
p. 62)
2.7 mm (0.106 in)
2.7 mm (0.106 in)
(
p. 62)
BRAKE SYSTEM 12
67