Connecting VPN (Virtual Private Network)
VPN (Virtual Private Network) is a technology to connect to the
information in a protected local network such as enterprises or
universities from another network.
・
To set up a VPN connection from the terminal, you need to retrieve
the information related to security from your network administrator.
・
Authentication may be required. Set pattern, PIN, or password for
the security unlock preference in advance.
Adding VPN
1
From the Home screen, [Settings]
[VPN]
2
[
]
Set each item
+
→
Connecting to VPN
1
From the Home screen, [Settings]
[VPN]
2
Select a VPN to connect to
3
Enter necessary authentication information
[CONNECT]
・
When you are connected to the VPN,
bar.
→
P.98
[More]
→
[SAVE]
→
[More]
→
appears on the status
Disconnecting VPN
1
From the Home screen, [Settings]
[VPN]
2
Select a VPN to disconnect
3
[DISCONNECT]
Setting access point (APN)
The access point for accessing the internet (sp-mode) is registered by
→
default and you can add or change it if necessary.
・
For details of sp-mode, refer to NTT DOCOMO website.
https://www.nttdocomo.co.jp/service/spmode/ (in Japanese only)
・
For using mopera U, Business mopera Internet add the access
point manually.
For details on mopera U, refer to mopera U website.
https://www.mopera.net/ (in Japanese only)
→
Checking the access point in use
1
From the Home screen, [Settings]
[Mobile networks]
→
90
→
[More]
→
[More]
[Access Point Names]
→
→
→
Settings