NTT docomo MONO MO01J Instruction Manual page 54

Receiving a call
Example When a call is received in sleep mode
〈 〉
1
A call is received
The incoming call screen (full-screen) appears.
･ O
Press /volume key to stop ringtone or vibration.
･
When receiving a call with VoLTE, "HD" is displayed. However,
depending on connected network, it may not be displayed.
2
→ [ACCEPT]
Declining a call : →
Rejecting a call and sending SMS :
→ [Reject call with SMS]
Recording messages :
[Answering Machine]
3
When a call is ended, [END CALL]
Information
◆
･
When receiving a call while the Home screen is displayed or
application is activated, the notification screen is displayed at the
top of the screen. After you accept and end call, the previous
screen is displayed. Tap a caller's name or phone number on the
incoming call screen, the incoming call screen (full-screen).
･
When you could not answer a call, notification icon (
appears on the status bar. Open the Notification panel (
check missed calls, dial or send SMS.
･
With "Suguden setting" (
→
calls simply by holding the terminal up to the ear.
[REJECT]
→ [Response options]
→ Select a message
→ [Response options] →
→ P.37)
P.55) ON, you can answer incoming
Operation during a call
The following operations are possible in the screen during a
call.
･
You can adjust call volume with the volume key while dialing/during
a call.
a
Name or phone number
b
End call
c
Show/hide the dial keypad
Send touch-tone signals.
d
Hold on call/cancel on-hold
e
Call duration time
f
Calling with VoLTE
P.38) to
→
g
Set speaker phone to ON/OFF
･
When connecting a Bluetooth device, you can switch voice
output devices.
52
a
b
c
d
e
f
g
Calling