NTT docomo MONO MO01J Instruction Manual page 35

d
Change the keyboard size
･
Drag it to change the keyboard to a desired size.
e
: Activate voice input
: Display characters assigned to a key in reverse order
: Undo the last operation
f
Move the cursor left
g
: Display a list of emoticon/symbol/smiley
: Convert input mode of ongoing entering characters to
Alphanumeric/Kana
: Switch only one alphabet to uppercase/Switch symbol display
: Switch to uppercase of alphabet
: Switch to lowercase of alphabet/Switch to symbol display
h
Switch input mode to Hiragana-kanji/Half-width alphabet/Half-
width number
･
Touch and hold to display iWnn IME menu for the following
operations.
Change settings : → P.34
Keyboard type : Switch keyboards to 10-key keyboard/
QWERTY keypad/50-key keyboard.
Switch 50-key : Switch key arrangement.
It appears in Kana mode for 50-key keyboard.
Input mode : Switch input mode to Hiragana-kanji/Full-width
katakana/Half-width katakana/Full-width alphabet/half-width
alphabet/Full-width number/Half-number/voice input.
Input Extension plug-in : Use an installed extension plug-in
application.
It is displayed when "Input Extension plug-in" in "External
application" is set to [Use].
Add word-Japanese : Register Japanese words to the user
dictionary.
Add word-English Others : Register English/other words to
・
the user dictionary.
→ P.34
i
Delete a character at the left side of cursor
j
Move the cursor right
k
: Enter space
: Convert characters
: Enter a space/Convert characters
l
: Enter linefeed
/ / : Fix
: Move the cursor to the next entry field
: Search
m
: Convert to voiced sound character/semi-voiced sound
character/contracted sound character/geminate consonant
character
: Switch between uppercase and lowercase of alphabet
/ / : Switch only one alphabet to uppercase/Switch
between uppercase and lowercase of alphabet
n
Enter a symbol
･
Touch and hold to display symbols assigned to the key.
Information
◆
･
To hide a keyboard, tap
character entry field.
Input method for 10-key keyboard
You can use the following input methods for 10-key keyboard.
･
Set an input method.
→
Flick input
■
When you touch and hold a key assigned the character you want to
enter, characters (flick guide) will be displayed above the key. Without
releasing your finger, flick towards the desired character.
･
To enter a voiced sound/semi-voice sound/contracted sound/
geminate consonant character, flick and then tap
33
. To display the keyboard again, tap a
P.34
Before Using the Terminal
once or twice.