NTT docomo MONO MO01J Instruction Manual page 112

External device connection
Connection with a PC
When the terminal and a PC are connected by Micro USB Cable
01 (optional), data stored on the microSD card and in the
internal storage of the terminal can be operated from the PC.
･
Windows Vista, Windows 7, Windows 8.1, and Windows 10 PC are
supported. However, operations for all PCs are not guaranteed.
1
Insert the microUSB plug of the USB cable into
the microUSB jack of the terminal
2
Insert the USB plug of the microUSB cable into
a USB port of a PC
3
Open the Notification panel
notification of connectivity
4
Select an item
Charge only : Just charge the terminal.
Install driver : Install the driver software to a PC.
File transfers : The terminal is displayed as a USB storage on a
PC and you can access the internal storage or microSD card
inserted to the terminal.
Network share : Switch to USB tethering.
→ Tap the
→ P.88
110
Information
◆
･
When a microSD card is not mounted on the terminal, the microSD
card cannot be recognized by a PC. In such case, from the Home
screen, [Settings] [Storage]
→
connect a PC.
Connecting with a printer
Connect your printer using Wi-Fi function to print images
saved to the terminal or webpages viewed with Chrome.
･
To use Wi-Fi function, connect the terminal and a printer to the
same Wi-Fi network. P.86
→
Installing plug-ins
For connecting the terminal and a printer, installing plug-in is needed
beforehand.
1
From the Home screen, [Settings]
A printing service list screen appears.
2
[ADD SERVICE]
→
instructions to download a plug-in
3
After installation, tap
The installed plug-in is displayed in the printing service list screen.
4
of plug-in you want to use
it to ON ( )
[SD card] Tap [MOUNT] and then
→ →
→ [Printing]
Follow the onscreen
(Back)
Tap [OK] to turn
→
External device connection