NTT docomo MONO MO01J Instruction Manual page 118

International dial assist :
Network service : → P.116
Setting the international dial assistance
1
From the Home screen,
[Roaming settings]
2
Set each item
Automatic conversion : Add international prefix or country
code automatically.
Country code : Select a country code to be used for auto
conversion function.
International prefix : Select an international prefix to be used
for auto conversion function.
Setting network services (overseas)
Set network service such as voice mail from overseas.
･
You need to set Remote operation settings to activate in advance.
･
If you make the settings overseas, you are charged a call fee to
Japan from the country you stay.
･
For some overseas network operators, settings may not be made.
1
From the Home screen,
[Roaming settings]
2
Select a service
Remote operation (charges apply) : Set whether to start
Remote operation.
Caller ID notification request service (charges apply) : Play
guidance requesting a caller ID notification when an call without
caller ID is received.
P.116
→
[Call settings]
→ →
→ [International dial assist]
[Call settings]
→ →
[Network service]
→
Incoming call notification while roaming (charges apply) :
→ P.115
Roaming guidance (charges apply) :
Voicemail service (charges apply) : Take messages from
callers when you are in a place where the radio wave does not
→
reach, or while the power is turned off. (Application is required)
Call forwarding service (charges apply) : Transfer incoming
calls to the mobile phone etc. that you registered in advance.
(Application is required)
3
[OK] Operate according to the voice guidance
→
After returning to Japan
When you return to Japan, the terminal is connected to
DOCOMO network automatically. If connection is failed,
perform the following operations.
･
Set [Preferred network type] to [4G/3G/GSM (Auto)].
･
Set [Network operators] to [Select automatically].
→
116
→ P.115
P.114
→
P.113
→
International roaming