NTT docomo MONO MO01J Instruction Manual page 41

e
Items of the quick settings
･
Brightness level → P.92
･
Wi-Fi → P.86
Tap to scan for available Wi-Fi networks and get connected.
appears next to the icon and you can check if the terminal is
performing data communication or not.
･
Bluetooth P.108
→
Tap to select a paired device and get connected.
･
Mobile data → P.87
A name of connected network operator is displayed below the
icon
appears next to the icon and you can check if the terminal is
performing data communication or not.
･
Do not disturb P.92
→
You cannot set while the silent mode is enabled.
･
Airplane mode → P.88
･
Auto-rotate → P.91
･
Hotspot → P.89
･
Location P.76
→
･
Flashlight : Switch ON/OFF of the light.
Information
◆
･
To close the quick settings panel, flick the quick settings panel
upward, or tap (Back).
Sleep mode
When the sleep mode is set, the screen backlight turns off so that you
can avoid misoperations of the touch panel and lock the screen. You
can also reduce battery consumption.
1 O
Information
◆
･
The terminal goes into sleep mode automatically when you do not
operate the terminal for the time specified in "Sleep" (
Unlocking the screen lock
1 O
In sleep mode,
2
On the lock screen,
The lock is canceled.
39
→ P.91)
®
"ひつじのしつじくん
(Butler Sheep)"
©NTT DOCOMO
Before Using the Terminal