NTT docomo MONO MO01J Instruction Manual page 107

Installing/Removing microSD card
･
Before installing/removing, cancel mounting (reading/writing
available) ( P.94) and turning OFF the power.
→
･
To remove the tray, use the included SIM ejector (sample).
Installing
■
a
Open the docomo nano UIM card/microSD card slot cover
P.20
b
Insert the tip of SIM ejector into the hole for removing the
tray P.25
→
The tray pops out a little.
･
Insert it straight. May cause a malfunction or damage.
c
Draw the tray straight →
d
With the IC side facing down, set the microSD card into the
tray
･
Be sure to fit the microSD card into the tray so that it does not
shift.
e
Insert the tray into the terminal
･
Check the orientation of tray to install correctly.
P.26
P.26
→
■ Removing
a
Open the docomo nano UIM card/microSD card slot cover
P.20
b
Insert the tip of SIM ejector into the hole for removing the
tray → P.25
The tray pops out a little.
･
Insert it straight. May cause a malfunction or damage.
→
c
Draw the tray straight
d
Remove the microSD card from the tray.
e
Insert the tray into the terminal
･
Check the orientation of tray to install correctly.
105
P.26
→
P.26
→
File management
→