NTT docomo MONO MO01J Instruction Manual page 33

･
Even in silent mode or regardless of the volume settings, shutter
sound for still image shooting, shooting start/end sound for video
recording, auto focus lock sound, count down sound for self-timer,
and screen shot sound on still image/video shooting screen of the
camera are not muted.
Screenshot
You can save a screen displayed on the terminal as an image.
･
Some screens may not be saved.
1 O
Press and hold
volume down key at the same time (1 sec. or
more)
･
Screenshot images are saved in png format. They can be
viewed with "Gallery" or "Photos" application.
Emergency mode
In case of emergency such as disaster, reduce the battery
consumption by restricting the screen brightness or turning off
functions.
1 O
Press and hold
2
[Emergency mode]
The terminal restarts and Emergency mode is set.
･
To cancel the setting, perform the same operations again or
from the Home screen in Emergency mode, tap [Emergency
mode] [OK].
→
and the lower part of
(1 sec. or more)
→ [OK]
Information
◆
･
Alternatively, from the Home screen,
[OK] to set Emergency mode.
Application permissions
The first time you launch an application or function that accesses
other functions and information on your terminal, a confirmation
screen that requests authorization for access rights appears. When
you approve these access rights, the corresponding functions and
information become available to the application/function.
･
Confirmation screens vary depending on the application or
function. Check the displayed content carefully and operate.
〈 Example 〉 When launching "File Manager" application for
the first time
1
From the Home screen,
A confirmation screen appears.
2
[DENY]/[ALLOW]
After this step, follow the onscreen instructions.
Information
◆
･
If permission is not granted, some applications/functions may not
work, or use of the functions may be limited.
･
To change the permissions, from the Home screen, [Settings]
[Apps] Select an application
→
permissions to change.
31
→ [Disaster kit] →
[File Manager]
→
[Permissions] Turn ON/OFF
→ →
Before Using the Terminal
→ Tap
→