NTT docomo MONO MO01J Instruction Manual page 131

Image pickup Type
device
Size
Camera effective pixels
Camera recorded pixels
(Max.)
Digital zoom Still image
Video
Wireless LAN
Bluetooth Version
function
Radio power power class 2
Supported
*7
profile
Out-camera : Backside-illumination
layered CMOS
In-camera : Backside-illumination
layered CMOS
Out-camera : 1/3.0 inch
In-camera : 1/5.0 inch
Out-camera : Approx. 13,300,000
pixels
In-camera : Approx. 4,900,000
pixels
Out-camera : Approx. 13,000,000
pixels
In-camera : Approx. 4,900,000
pixels
Out-camera : Up to approx. 4.0 x
(30 levels)
In-camera : Up to approx.. 4.0 x
(30 levels)
Out-camera : Up to approx. 4.0 x
(30 levels)
In-camera : Up to approx.. 4.0 x
(30 levels)
IEEE802.11b/g/n compatible
*6
4.1
HFP (1.6), HSP (1.2), OPP (1.2),
SPP (1.0), A2DP (1.3) (SBC),
AVRCP (1.3), PBAP (1.1), PAN
(1.0)
Earphone/microphone jack
Display language
Input language (Character
entry)
Input language (Voice input) By Google voice search function
*1 Continuous stand-by time is an estimate of the stand-by time
when radio signal reception is normal. Stationary continuous
stand-by time is the estimated average operation time when
radio signal reception is normal.
In certain circumstances, the stand-by time may drop to as low
as half the time shown due to the internal battery charge,
function settings, temperature, or radio signal reception in the
area (no reception or weak).
*2 Activating applications reduces call (communication)/stand-by
time even if you do not call or use the Internet.
*3 Continuous call time is an estimate of the call time when radio
signal reception is normal.
*4 Charging time is an estimate of the time required to charge an
empty internal battery from when the terminal is turned off and
then turned on after approximately 10 minutes. Under high or
low temperature, charging may require longer time.
*5 IEEE802.11n supports 2.4 GHz.
*6 It is confirmed that the terminal and all Bluetooth devices are
compliant with Bluetooth standards designated by Bluetooth
*5
SIG, and they are authenticated. However, operation method
may differ or data transfer may not be possible depending on
the device's characteristics or specifications.
*7 These are created by standardizing connection procedures for
Bluetooth devices according to individual product properties.
*8 It supports PAN-NAP and PANU.
*8
129
φ 3.5 mm earphone jack, tetrapolar
Japanese/English/Chinese
Japanese/English
Appendix/Index