NTT docomo MONO MO01J Instruction Manual page 123

■ Bluetooth function
The terminal cannot be connected to a Bluetooth
●
communication device/A Bluetooth communication
device cannot be found by search
Make Bluetooth communication device (commercial item)
registering stand-by state and then register the device on the
terminal. If you delete already registered device and register the
device again as a new device, delete the registrations on both
Bluetooth communication device (commercial item) and the
terminal and then perform registration of the devices.
● Calls cannot be made from the terminal connecting to
external device such as car navigation or handsfree
device.
If calls are made several times when the other party does not
answer or is out of service, the call to this number may be
disabled. In this case, turn terminal off and on.
■ External device connection
An external device connected using microUSB cable is
●
not recognized
Reconnect the external device. However, some devices may not
be detected.
Map/GPS
■
● Cannot set AUTO-GPS service information
･ Check if the battery level is low and AUTO-GPS function stops.
If AUTO-GPS stops due to [Low-power operation settings],
AUTO-GPS service information cannot be set. In this case, set
[Low-power operation settings] to [Not suspend] or charge the
battery. P.27 , P.95
→
･ Check if [AUTO-GPS operation settings] is unmarked.
Error messages
Cellular network not available.
●
･ The terminal is out of service area, or the received signal is too
weak. Move to a location where radio signal can be reached.
･ The docomo nano UIM card is not working properly.
Removing and inserting docomo nano UIM card may solve the
problem.
Insert the docomo nano UIM card in another terminal. If this
works, it is probably the terminal that is causing the problem.
→ P.108
In this case, contact "Repairs (Inquiries/Request)" on the last
page of this manual (in Japanese only).
● Restricted access changed
Appears when the voice service or data service is not received.
SIM card is locked
●
Enter your PIN code correctly.
● SIM card is PUK-locked.
Enter your PUK (Personal Unblocking Key) correctly.
Unusable SIM card
●
PIN lock disable code is locked. Please contact a docomo Shop.
● Memory is getting low
Available memory space in the terminal is low. If you continue to
use the terminal, some functions or applications may not work.
Activate the Settings screen and select unnecessary
applications, then tap [UNINSTALL] to delete the applications.
P.93
● Storage is full/Please delete some files and try again!
There is no memory space in the microSD card. Delete
unnecessary data to save the memory space.
→ P.95
121
→ P.99
P.99
→
→ P.106
Appendix/Index
→