NTT docomo MONO MO01J Instruction Manual page 28

3
Draw the tray straight
4
With the IC side facing up, set the docomo
nano UIM card into the tray
･
Be sure to fit the docomo nano UIM card into the tray so that it
does not shift.
Notch
IC
5
Insert the tray into the terminal
･
Check the orientation of tray to install correctly.
6
Close the docomo nano UIM card/microSD card
slot cover P.20
→
Removing
1
Open the docomo nano UIM card/microSD card
slot cover → P.20
2
Insert the tip of SIM ejector into the hole for
removing the tray
The tray pops out a little.
･
Insert it straight. May cause a malfunction or damage.
3
Draw the tray straight
26
P.25
→
P.26
→
Before Using the Terminal