NTT docomo MONO MO01J Instruction Manual page 27

*2 The antenna is built into the terminal. Covering around the
antenna with your hand may affect the quality of
communications.
*3 Take care not to cover the speaker when you attach a
commercial available cover etc. It may hinder sound hearing.
docomo nano UIM card
The docomo nano UIM card is an IC card recorded user
information such as phone number etc.
･
You can use the terminal only with a docomo nano UIM card. If you
have a docomo mini UIM card, docomo UIM card, or FOMA card,
bring it to a docomo Shop to replace it with a docomo nano UIM
card.
･
If docomo nano UIM card is not inserted to the terminal, some
functions such as making/receiving calls and sending/receiving
SMS are not available.
･
For details on the docomo nano UIM card, refer to the docomo
nano UIM card manual or NTT DOCOMO website.
Security code for docomo nano UIM card
The docomo nano UIM card has a security code called a PIN code.
The code is set to "0000" at subscription, which you can change by
yourself. → P.99
Installing/Removing docomo nano UIM
card
･
Install/remove after turning off the power.
･
To remove the tray, use the included SIM ejector (sample).
Installing
1
Open the docomo nano UIM card/microSD card
slot cover P.20
→
2
Insert the tip of SIM ejector into the hole for
removing the tray
The tray pops out a little.
･
Insert it straight. May cause a malfunction or damage.
25
Before Using the Terminal