NTT docomo MONO MO01J Instruction Manual page 30

･
When the battery usage time per one charge becomes about half
of that at the time of purchase, replacing the internal battery is
recommended because the internal battery is near the end of life.
Available charging adapter
For details, refer to the operation manual of AC adapter or DC
adapter.
AC Adapter 05 (optional) : Supports 100V to 240V AC. The shape
of AC adapter plug is for AC 100 V (Japanese specification). A
conversion plug adapter for the destination country is required when
using an AC adapter compatible from AC 100 V to 240 V. Do not use
an electrical transformer for overseas use to charge the terminal.
DC Adapter 04 (optional) : Used to charge in a car.
Charging with AC adapter
Follow the procedure below to use AC Adapter 05 (optional) for
charging.
1
With the side engraved with "B" facing up,
insert the microUSB plug of the AC adapter
horizontally into the microUSB jack
2
Insert the AC adapter's power plug into an
outlet
･
The LED indicator on the terminal lights up.
3
When charging is complete, remove the AC
adapter's power plug from the outlet
4
Remove the microUSB plug of the AC adapter
horizontally from the microUSB jack of this
terminal
Charging with DC adapter
→ P.36
DC Adapter 04 (optional) supplies power from a car accessory socket
(12 V/24 V).
For details, refer to the DC Adapter 04 manual.
28
LED indicator
microUSB jack
microUSB
plug
AC adapter
Before Using the Terminal