NTT docomo MONO MO01J Instruction Manual page 31

Charging with a PC
You can charge the terminal via a PC using Micro USB Cable 01
(optional) etc.
Turning power on/off
Turning power on
1 O
Press and hold
(2 sec. or more)
The terminal vibrates and the lock screen appears following the
startup screen.
･
For the first activation, make initial settings.
2
Unlock the screen lock
･
For unlocking method for screen lock, refer to "Unlocking
screen lock". → P.39
Turning power off
1 O
Press and hold
2
[Power off]
■ Menu displayed when
sec. or more)
Power off : P.29
→
Reboot : Restart the terminal.
Emergency mode : → P.31
until the terminal vibrates
P.35
→
(1 sec. or more)
O
is pressed and hold (1
Basic operations
Using the touch panel
Touch the touch panel directly to operate the terminal.
Notes on using the touch panel
Touch panel is designed for being touched lightly with fingers. Do not
push the touch screen hard with a finger or press sharp objects (nail,
ballpoint pen, pin, etc.) against the screen.
･
Touching the touch panel may not work in the following cases. Note
that it may cause a malfunction.
- Operation with tip of fingernail
- Operation with gloved hand
- Operation with foreign object on the screen
- Operation with protective sheet or seal on the screen
- Operation on the wet touch panel
- Operation with fingers wet with sweat or water
- Operation under water
Tap/Double-tap
Tap : Touch the screen lightly and release the finger quickly.
Double-tap : Tap twice quickly.
29
Example: Tap
Before Using the Terminal