Device Display - NTT docomo MONO MO01J Instruction Manual

Adding an access point
･
Do not change the MCC/MNC to other than 440/10. The setting
disappears from the screen.
1
From the Home screen, [Settings]
[Mobile networks]
2
3
[Name] → Enter a network profile
4
[APN] → Enter an access point name
5
Enter other items required by network operator
6
[Save]
→
Information
◆
･
If you have changed MCC/MNC settings and they do not appear on
the screen, reset to default or set the access point manually.
Initializing an access point
By initializing an access point, the default state is restored.
1
From the Home screen, [Settings]
[Mobile networks]
2
[Reset to default]
→
Information
◆
･
You can delete access point one by one by tapping an access point
from the APN list screen →
screen [Delete APN].
→
[More]
→
[Access Point Names]
→
→ [OK]
→ [OK]
[More]
→
→ [Access Point Names]
Tap on the access point editing
Device
Display
→
Set screen brightness or auto-rotate screen.
1
From the Home screen, [Settings]
2
Set each item
Brightness level :
Adaptive brightness : Set whether to adjust brightness
automatically according to the ambient brightness. Adjust
"Brightness level" (
LED indicator : Set whether to light/flash the LED indicator while
charging, when the remaining battery is low, or for notifications in
sleep mode.
Wallpaper :
→
Sleep : Set a time from when the screen backlight turns off to
when the screen goes into sleep mode.
Press power button twice for camera :Set whether to enable
activation of "Camera" application by pressing
without canceling the screen lock.
Daydream : Set the screensaver.
→
Font size : Set font size.
When device is rotated : Set whether to rotate the screen
according to the terminal orientation.
･
Even when you change the orientation of the terminal, the
screen may not change depending on the screen displayed.
91
→ P.92
P.92) to change the standard brightness.
→
P.43
[Display]
→
O
twice
Settings