10H - DAILY SERVICING OR EVERY 10 HOURS OF SERVICE
CHECK
- Carry out a general inspection of the lift truck:
• Fluid leaks or stains on the ground.
• Additional objects on the lift truck and in the driver protection or the cab.
• Mounting and adjustment of lights and rear view mirrors.
• Mounting and locking of the attachment.
• Condition of the tyres, to detect cuts, blisters, wear, etc.
- According to the conditions of use and the environment, ensure that the lift truck is clean:
• Cleanliness of lights, rear view mirrors, and windows.
• Cleanliness of the driver's cab (
• Cleanliness of the engine housing and inside the frame (
of materials (e.g. straw, flour, sawdust, organic waste, etc.).
Particular attention should be paid to accumulations of flammable materials and fuel or lubricant leaks.
CHECK
Place the lift truck on level ground with the engine stopped, and allow the engine to cool.
- Open the engine cover (
- Pull out dipstick 1.
- Clean the dipstick and check the correct level between the two notches.
- If necessary, add oil (
- Remove the access panel 2.
- Add oil through filling hole 3.
- Visually check that there is no leakage or seepage of oil in the engine.
IMPORTANT
Follow the operator instructions (
10H - DAILY MAINTENANCE).
IMPORTANT
They increase the fire risk considerably.
COMMAND AND CONTROL INSTRUMENTS).
LUBRICANTS AND FUEL).
Lift truck environment
OPERATOR INSTRUCTIONS).
OCCASIONAL MAINTENANCE) to prevent leaks and build-up
Engine oil level
3 - 12
www.duma-rent.com
1
2
3