Extending The Head-Rest; Lumbar Adjustment; Adjustment Of The Angle Of The Back-Rest; Longitudinal Adjustment - Manitou MC 25-2 D K ST3A S1 Operator's Manual

EXTENDING THE HEAD-REST (FIG. E)
- The height of the head-rest can be adjusted by pulling it upwards (the notches
will click) up to the stop.
- The head-rest can be removed by applying sufficient pressure to pull it off the stop.
LUMBAR ADJUSTMENT (FIG. F)
This increases the comfort of the seat and the driver's freedom of movement.
- Turn the handle either left or right to adjust the height or depth of the lumbar
support.
ADJUSTMENT OF THE ANGLE OF THE BACK-REST (FIG. G)
- Support the back-rest, pull the lever and position the back-rest to find the desired
position.
If you do not support the back-rest when making adjustments, it swings completely forwards.
LONGITUDINAL ADJUSTMENT (FIG. H)
- Adjust the locking lever until you reach the position required. This then locks and
the seat will not shift into another position.
MAINTENANCE (FIG. I)
- Keep your seat clean to ensure it operates efficiently
- Clean the cushions using a suitable product.
- Apply to a small hidden area first, to check the colour-fastness of covering.
- Avoid wetting the cushions.
- To facilitate cleaning remove the cushions from the seat frame.
IMPORTANT
2-41
www.duma-rent.com
E
F
G
H
I