Manitou MC 25-2 D K ST3A S1 Operator's Manual page 104

REPLACE
For very dusty atmospheres, there are pre-filtration elements (
AND BELTS).
In very dusty atmospheres, with pre-filtration, the cartridge replacement interval must
be reduced to 250 hours.
Change the cartridge in a clean location, with the engine stopped.
Never operate the lift truck with the air filter removed or damaged.
- Open the engine cover (
- Release the locks 1 and remove the cover 2.
- Gently remove the cartridge 3 taking care to avoid spilling the dust.
- Leave the safety cartridge in place.
- Carefully clean the following parts with a clean, damp, lint-free cloth:
• The inside of the filter and its cover and the inlet hose.
• The gasket surfaces of the filter and the cover.
- Check the condition and attachment of the hoses between the air filter and the
engine
- Check the condition and connection of the clogging indicator on the filter.
- Check the condition of the new filter cartridge (
- Introduce the cartridge into the filter axis, pressing on the edges and not the middle.
- Reassemble the cover, guiding the valve downwards.
CHECK
CHECK
CHECK
CHECK
REPLACE
CHECK
CHECK
CHECK
CHECK
CHECK
CHECK
IMPORTANT
COMMAND AND CONTROL INSTRUMENTS).
FILTERS AND BELTS).
Condition of wheels and tyres *
Hydraulic oil tank suction strainer *
Speeds of hydraulic movements *
Condition of hoses and flexible pipes *
Condition of cylinders (leakage, rods) *
Condition of wiring harnesses and cables *
Lights and signals (option) *
3 - 28
Dry air filter cartridge
FILTERS, CARTRIDGES
Engine silent blocks *
Engine speeds *
Engine valve clearances *
Warning indicators *
www.duma-rent.com
1
1
2
3