Unlocking The Hydrostatic Transmission; Unlocking The Front Wheel Brakes; Towing The Lift Truck; Occasional Operation - Manitou MC 25-2 D K ST3A S1 Operator's Manual

OCCASIONAL OPERATION

TOW
If the lift truck is on a slope, with parking brake applied, chock it so that it does not
descend the slope.
The lift truck must be towed very slowly (less than 5 km/h) and for as short a distance as possible (less than 100 m).
Use a rigid drawbar, as the lift truck is disconnected from its brake system.

UNLOCKING THE HYDROSTATIC TRANSMISSION

NOTE: When towing the lift truck, the high pressure limiters 1 must be unlocked to
avoid damaging the hydrostatic transmission.
- Open the engine cover (
- Unscrew the nuts 2 by two turns at the most.

UNLOCKING THE FRONT WHEEL BRAKES

- Open the battery access flap 3.
- Press the button 4.
- Pump (minimum of 20 times) using the button 5 to release the front wheel brakes.

TOWING THE LIFT TRUCK

- Switch on the hazard warning lights (Option).
- Tow the lift truck gently and carefully.
Steering hydraulic assistance fails:
• Use the steering wheel slowly but powerfully.
• Avoid sudden or jerky movements.
AFTER TOWING THE LIFT TRUCK
- Proceed in the reverse order to lock the high pressure limiters.
- Pull button 4 to reactivate braking.
IMPORTANT
COMMAND AND CONTROL INSTRUMENTS).
3 - 38
www.duma-rent.com
Lift truck
1
2
4
1
2
3
5