Driver's Cab Access; Driver's Seat; Seat Belt; Description (Standard) - Manitou MC 25-2 D K ST3A S1 Operator's Manual

DESCRIPTION (standard)

1 - DRIVER'S CAB ACCESS

- Getting into and out of the driver's cab.
- Use the three support points provided.
1 - Left handle.
2 - Steering wheel.
3 - Driver's cab floor.

2 - DRIVER'S SEAT

ADJUSTING WEIGHT (FIG. A)
- Lower lever 1 to the desired position.
ADJUSTING DEPTH (FIG. B)
- Pull lever 2, then move the seat forward or backward into the desired position.
- Release the lever to lock it.
ADJUSTING ANGLE OF BACK-REST (FIG. C)
- Pull lever 3, then tilt the back-rest to the desired position.
- Release the lever to lock it.

3 - SEAT BELT

- Sit correctly on the seat.
- Check the condition of the seat belt.
- Place the seat belt at hip level, without twisting it.
- Lock the seat belt.
2-32
www.duma-rent.com
1
2
3
A
1
B
2
C
3