Air Conditioning Control; Door Opening Handles; Door Release Handles - Manitou MC 25-2 D K ST3A S1 Operator's Manual

34 - AIR CONDITIONING CONTROL

Once a week in winter operate the air conditioning on a one-off basis to guarantee it is operating correctly.
In cold weather, start and warm up the engine before starting the air conditioning to avoid damaging the air conditioning circuit.
If the air conditioning seems to operate irregularly carry out a service (
• A - Temperature adjustment.
• B - Ventilation speed adjustment.
• C - On/Off for the air conditioning with indicator lamp.
CONDITIONS OF USE:
- The air conditioning only works if the engine is running.
- The doors and windows must be closed.
- The air intakes must not be obstructed (frost, snow, leaves, etc.).
- As a minimum, one cab heating vent must be open to avoid the risk of the air
conditioning circuit freezing.
NOTE: Possible water loss under the lift truck are due to the dehumidifying effect
of the unit. These losses may vary depending on the exterior temperature
and humidity.

35 - DOOR OPENING HANDLES

- Insert the ignition key into lock A to lock or unlock the cab.
- Pull on the handle B or C to open the door.
NOTE: The door must be:
• Either closed.
• Either completely open and locked on the door arrester system.

36 - DOOR RELEASE HANDLES

- Pull on the handle A to release and close the door.
IMPORTANT
Never try to repair possible faults in the circuit, consult your dealer.
2-48
MAINTENANCE) or consult your dealer.
C
www.duma-rent.com
C
B
A
3
B
A
C
A