Version Check; Option Page - GE Voluson 730Pro Service Manual

GE M S - K
EDICAL YSTEMS
D KTI105947, R
IRECTION
8-2-4 Preparations
1.) Press the UTILITIES key on the control panel once to display the Utilities menu.
2.) Select the SYSTEM item from the Utilities menu - which is displayed on the left side of the screen.
3.) Select the
version is installed in the unit.
currently installed
Software version
4.) Select the
(Option is activated for demo and expires
on the date shown in the "Valid" column)
(Option is not activated)
(Option is permanently activated [purchased])
Please print out the
NOTICE
RETZTECHNIK
2
EVISION
(cont'd)
page on the System Setup desktop screen to see which Software/Hardware
SYSTEM INFO
Figure 8-1 Version check
page on the System Setup desktop screen to see which Options are installed.
OPTION
D = Demo
I = Inactive
P = Permanent
Figure 8-2 Option page
page or write down all the option codes which are shown in the "Key" fields!
OPTION
Chapter 8 - Replacement Procedures
DRAFT V
OLUSON
® 730P / 730P V (BT´04)
RO RO
S M
ERVICE ANUAL
8-3