How To Change Video Norm - GE Voluson 730Pro Service Manual

GE M S - K
EDICAL YSTEMS
D KTI105947, R
IRECTION
3-8-3-4

How to change Video Norm

BT Version: at BT´04 systems:
Changing the Video Norm is not possible by the user. Please contact your GE service representative.
BT Version: at systems that were upgraded to BT´05:
1.) Press the UTILITIES key on the Control Panel and then select the SYSTEM item from the menu.
2.) In the System Setup desktop, select the
3.) If not currently selected, click the desired "Video Norm" field PAL (50Hz) or NTSC (60Hz).
NOTE: The Adjustment of the Video Norm will take about 3 minutes!
4.) Click SAVE&EXIT to exit System Setup. The system will reboot.
3-42
RETZTECHNIK
2
EVISION
Section 3-8 - System Configuration
RAFT V
OLUSON
page, enter the password
SERVICE
® 730P / 730P V (BT´04)
RO RO
S M
ERVICE
SHE and click ACCEPT.
ANUAL