GE M
S
- K
EDICAL
YSTEMS
D
KTI105947, R
IRECTION
3-7-3
Printer Installation manually
13.)Select the manufacturer and model of your printer and confirm with the NEXT button.
14.)Assign a name, decide if the printer should be used as default printer and confirm with NEXT.
see:
15.)Select 'Do not share this printer' and confirm the "Printer Sharing" window
NEXT.
16.)The "Complete the Add Printer Wizard" window appears on the screen.
17.)Complete the manual Printer Installation with the FINISH button.
18.)Close all open windows, close the "System Setup" with SAVE & EXIT and restart the system
(turn off and on the system).
After boot up of the system, verify the correct settings in the printer "Properties", see:
NOTICE
"Adjustment of Printer Settings" on page
Ver
3-32
RETZTECHNIK
2
EVISION
Figure
3-40.
Figure 3-40 Assign name and select Printer Sharing - no
Figure 3-41 Complete manual Printer Installation
Section 3-7 - Printer Installation
RAFT
(cont'd)
3-33.
V
® 730P
/ 730P
OLUSON
RO
S
(Figure
3-40) by clicking
Section 3-7-4
V (BT´04)
RO
M
ERVICE
ANUAL