GE Voluson 730Pro Service Manual page 239

GE M S - K
EDICAL YSTEMS
D KTI105947, R
IRECTION
RT_ConnectionMngr::vAssembleRTSet: no
RT_TissueFilterBlock found for TISSUE3D Blocks
RT_ECG_Block::bStart ECGInterface failed!!
RT_MColorFilterBlock::RT_MColorFilterBlock: Memory
allocation failed
RT_MColorFilterBlock::vCheckIQDataSizeAndUpdateBuffer:
Memory allocation failed
RT_MColorFilterBlock::vDebugDrawIQDataCurve: Memory
allocation failed
RT_MotionMBlock::execute caused exception:: Addr from
DMA= xx, ReplayBuffAddr= xx, (Line+Header)Size= xx,
blockLength= xx, value i= xx!!
RT_PWorCW_Block::replay buffer size smaller than expected
RT_PWorCW_Block::execute caused exception:: Addr from
DMA= xx, ReplayBuffAddr= xx, (Line+Header)Size= xx,
blockLength= xx, line index= xx!!
RT_PWorCW_Block::execute: Error, length of DMA block 2 [xx]
is not aligned to linesize!!
Start Bandwidth too small
Start ET too small
Start frequency too small
StoragePool: Not sufficient replay storage for B & CF Mode
available
StoragePool: Not sufficient replay storage for ECG available
StoragePool: Not sufficient replay storage for M Mode available
StoragePool: Not sufficient replay storage for MC or PW Mode
available
System detected severe error, please call technical support.
System detected severe error. Some components like Touch
Panel server may not be registered. Please register Touch
Panel server and restart.
The Database UserPrograms Corrupted
The Date format not stored properly
The Handle Unregistered
The Registry not closed
The System detected a problem with your harddisk. Please do not reboot
or shut down the machine!
Please contact your service department as soon as possible.
RETZTECHNIK
2
EVISION
Error Messages
Chapter 7 - Diagnostics/Troubleshooting
DRAFT V
OLUSON
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system
restart the system, call technical support
restart the system, call technical support
restart the system
close registry, restart, try again
close registry, restart, try again
restart the system
if possible,
• save "Full Backup" (see:
"DVD/CD", "Network", or "Other drive" (including images)
• if not currently done, save all images via Sonoview
(see: Section 4-5-6 on page
• call technical support
® 730P / 730P V (BT´04)
RO RO
S M
ERVICE
Actions
Section 4-5-3 on page 4-35) to
4-40) ,
ANUAL
7-31