Software And Functional Checks After The Upgrade; System Setup - System Info Page - GE Voluson 730Pro Service Manual

GE M S - K
EDICAL YSTEMS
D KTI105947, R
IRECTION
Section 8-7

Software and Functional Checks after the Upgrade

1.) Press the UTILITIES key on the control panel once to display the Utilities menu.
2.) Select the SYSTEM item from the Utilities menu - which is displayed on the left side of the screen.
3.) Select
Application Software
Backup File Name
Date of Factory Settings
EUM Version
Serviceplatform
information
Move the scroll bar downwards to review additional information about installed software/hardware.
Operating System
(e.g., Service Pack 4)
4.) Verify the correct settings of the
If necessary, customize the settings according to the printout.
5.) Check and (if necessary) match the
• "DICOM Configuration" dialog page; see:
• "Network Configuration" dialog page; see:
6.) Restart the system and perform basic functional checks to ensure system is functioning normally.
8-14
RETZTECHNIK
2
EVISION
to see which Software/Hardware version is installed in the unit.
SYSTEM INFO
Figure 8-20 System Setup - System Info page
Section 8-7 - Software and Functional Checks after the Upgrade
RAFT
page; see: Figure 8-2 on page
OPTION
page settings according to the printout:
NETWORK
Figure 8-3 on page 8-4
Figure 8-4 on page 8-4
V ® 730P / 730P
OLUSON RO
S
8-3.
V (BT´04)
RO
M
ERVICE ANUAL
System Type
Serial number
Hardware ID
SLOT_CPU
(e.g., KONTRON)