Product Icons - GE Voluson 730Pro Service Manual

GE M S - K
EDICAL YSTEMS
D KTI105947, R
IRECTION
1-2-3

Product Icons

The following table describes the purpose and location of safety labels and other important information
provided on the equipment.
Table 1-5
LABEL/SYMBOL
Identification and Rating Plate
Device Listing/Certification Labels
0123
Type/Class Label
IP Code (IPX 1)
IP Code (IPX 7)
"CAUTION
This unit weighs...
Special care must be used to avoid..."
RETZTECHNIK
2
EVISION
Product Icons
PURPOSE/MEANING
Manufacturer's name and address
Model and serial numbers
Electrical ratings
Laboratory logo or labels denoting
conformance with industry safety standards
such as UL or IEC.
Council Directive 93/42/EEC concerning
medical devices: The CE mark affixed to the
equipment testifies compliance to the directive.
Used to indicate the degree of safety or protection.
Indicates the degree of protection provided by
the enclosure per IEC 529. IPX 1 and IPX 7
indicates drip proof.
Equipment Type BF (man in the box symbol)
IEC 878-02-03 indicates B Type equipment
having even more electrical isolation than
standard Type B equipment because it is
intended for intimate patient contact.
This precaution is intended to prevent injury
that may result if one person attempt to move
the unit considerable distances or on an incline
due to the weight of the unit.
"CAUTION" The equilateral triangle is usually
used in combination with other symbols to
advise or warn the user.
ATTENTION - Consult accompanying
documents " is intended to alert the user to
refer to the operator manual or other
instructions when complete information cannot
be provided on the label.
Chapter 1 - Introduction
DRAFT V
OLUSON
Rear side of the unit
Monitor rear side
On each probe
Rear side of the unit
Rear side of the monitor
Rear side of the unit
on each probe
Footswitch
Probes
Probe connectors
Front side of the ECG-preamplifier (MAN)
Rear of Power Supply
Various
Rear side of Power Supply
® 730P / 730P V (BT´04)
RO RO
S M
ERVICE
LOCATION
ANUAL
1-5