Receiving And Unpacking The Equipment; Unpacking Procedure; Envelope At Front Panel Of The Crate - GE Voluson 730Pro Service Manual

GE M S - K
EDICAL YSTEMS
D KTI105947, R
IRECTION
Section 3-3

Receiving and Unpacking the Equipment

CAUTION
Transport only with forklift or stracker truck.
During transport pay attention to the point of gravity ("tilt and drop" indicator)!
Have two people available to unpack the Voluson® 730Pro / 730ProV.
Attempts to move the unit considerable distances or on an incline by one person could result
in injury or damage or both.
The device must only be transported in the original packaging!
NOTICE
Unpack the devices such a way that packaging can be reused.
A drill with size 20 torx bit and/or a Phillips 2 screwdriver is needed to open the crate.
Table 3-4
Step
1.
Loosen the screws and remove top panel from crate; top panel is used for the ramp.
center
of
gravity
3-4
RETZTECHNIK
2
EVISION
Figure 3-3 envelope at front panel of the crate

Unpacking Procedure

Section 3-3 - Receiving and Unpacking the Equipment
RAFT V
OLUSON
The envelope with delivery address, packing list and
invoice is located on the front panel of the crate.
Check whether delivery is complete (according to
packing list) and check visual damage!
Task
tilt and drop
indicator
® 730P / 730P V (BT´04)
RO RO
S M
ERVICE ANUAL