WAGO 750-407/040-000 Manual

WAGO 750-407/040-000 Manual

2-channel digital input; 220 vdc; 3 ms; extreme for wago-i/o-system 750 xtr
Hide thumbs Also See for 750-407/040-000:
Table of Contents
  • Deutsch

    • Table of Contents
    • Copyright
    • Notes about this Documentation
    • Validity of this Documentation
    • Symbols
    • Number Notation
    • Font Conventions
    • Table 1: Number Notation
    • Table 2: Font Conventions
    • Personnel Qualifications
    • Use of the 750 Series in Compliance with Underlying Provisions
    • Subject to Changes
    • Legal Bases
    • Important Notes
    • Technical Condition of Specified Devices
    • Disposal
    • 2.1.4.1.1 Electrical and Electronic Equipment
    • 2.1.4.1.2 Packaging
    • Safety Advice (Precautions)
    • Device Description
    • View
    • Figure 1: View
    • Table 3: Legend for Figure "View
    • Figure 2: Data Contacts
    • Data Contacts/Local Bus
    • Connectors
    • Power Jumper Contacts/Field Supply
    • Figure 3: Power Jumper Contacts
    • Table 4: Legend for Figure "Power Jumper Contacts
    • Cage Clamp
    • Figure 4: CAGE CLAMP ® Connectors
    • Table 5: Legend for Figure "CAGE CLAMP ® Connectors
    • Display Elements
    • Operating Elements
    • Figure 5: Display Elements
    • Table 6: Legend for Figure "Display Elements
    • Figure 6: Schematic Diagram
    • Schematic Diagram
    • Device Data
    • Supply
    • Inputs
    • Communication
    • Table 7: Technical Data - Device
    • Table 8: Technical Data - Supply
    • Table 9: Technical Data - Inputs
    • Table 10: Technical Data - Communication
    • Technical Data
    • Table 12: Technical Data - Power Jumper Contacts
    • Table 15: Technical Data - Climatic Environmental Conditions
    • Table 14: Technical Data - Mechanical Conditions
    • Table 13: Technical Data - Data Contacts
    • Table 11: Technical Data - Field Wiring
    • Connection Type
    • Climatic Environmental Conditions
    • Mechanical Conditions
    • Approvals
    • Standards and Guidelines
    • Table 16: Standards and Rated Conditions for Explosion Protection
    • Table 17: Climatic and Mechanical Environmental Conditions and
    • Table 18: EMC - Immunity to Interference
    • Table 19: EMC - Emission of Interference
    • Table 20: Standards and Rated Conditions for Rail Applications (en 50155)
    • Table 21: Input Bits
    • Process Image
    • Mounting
    • Mounting Sequence
    • Inserting and Removing Devices
    • Inserting the I/O Module
    • Figure 7: Insert I/O Module (Example)
    • Removing the I/O Module
    • Figure 8: Snap the I/O Module into Place (Example)
    • Figure 9: Removing the I/O Module (Example)
    • Connect Devices
    • Connecting a Conductor to the CAGE CLAMP
    • Figure 10: Connecting a Conductor to a CAGE CLAMP
    • Figure 11: Connecting Diagram, 2-Conductor Connection
    • Figure 12: Connecting Diagram, 3-Conductor Connection
    • Connection Examples
    • 2-Conductor Connection
    • 4-Conductor Connection
    • Figure 13: Connecting Diagram, 4-Conductor Connection
    • Use in Hazardous Environments
    • Marking Configuration Examples
    • Marking for Europe According to ATEX and Iecex
    • Figure 14: Marking Example According to ATEX and Iecex
    • Figure 15: Text Detail - Marking Example According to ATEX and Iecex
    • Table 22: Description of Marking Example According to ATEX and Iecex
    • Figure 16: Marking Example for Approved Ex I I/O Module According to
    • Figure 17: Text Detail - Marking Example for Approved Ex I I/O Module
    • Table 23: Description of Marking Example for Approved Ex I I/O Module According to ATEX and Iecex
    • Table 25: Description of Marking Example for Approved Ex I I/O Module
    • Table 24: Description of Marking Example According to NEC 500
    • Marking for the United States of America (NEC) and Canada (CEC)
    • Figure 19: Text Detail - Marking Example According to NEC 500
    • Figure 18: Marking Example According to NEC
    • Figure 20: Text Detail - Marking Example for Approved Ex I I/O Module
    • Figure 21: Text Detail - Marking Example for Approved Ex I I/O Module
    • Table 26: Description of Marking Example for Approved Ex I I/O Modules
    • Figure 22: Text Detail - Marking Example for Approved Ex I I/O Modules
    • Table 27: Description of Marking Example for Approved Ex I I/O Modules
    • Installation Regulations
    • Special Notes Regarding Explosion Protection
    • Special Notes Regarding ANSI/ISA Ex

Advertisement

Quick Links

Manual
Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband Fronts eite - H andbuc h; CI 2017; mit DocVariablen (Standar d) @ 28\mod_1486477502910_0.doc x @ 405388 @ @ 1
WAGO-I/O-SYSTEM 750 XTR
750-407/040-000
2DI 220V DC 3.0ms XTR
2-Channel Digital Input; 220 VDC; 3 ms; Extreme
Version 1.3.0
Pos : 3 /Alle Serien (Allgemeine M odul e)/Rec htlic hes, Allgemei nes/Impressum für Standardhandbüc her - allg. Angaben, Ansc hriften, T elefonnummer n und E-Mail-Adres sen @ 3\mod_1219151118203_21.doc x @ 21060 @ @ 1

Advertisement

Chapters

Table of Contents
loading

Summary of Contents for WAGO 750-407/040-000

  • Page 1 Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband Fronts eite - H andbuc h; CI 2017; mit DocVariablen (Standar d) @ 28\mod_1486477502910_0.doc x @ 405388 @ @ 1 Manual WAGO-I/O-SYSTEM 750 XTR 750-407/040-000 2DI 220V DC 3.0ms XTR 2-Channel Digital Input; 220 VDC; 3 ms; Extreme Version 1.3.0...
  • Page 2 We wish to point out that the software and hardware terms as well as the trademarks of companies used and/or mentioned in the present manual are generally protected by trademark or patent. WAGO is a registered trademark of WAGO Verwaltungsgesellschaft mbH. === Ende der Liste für T extmar ke Ei nband_vorne === Manual...
  • Page 3: Table Of Contents

    WAGO-I/O-SYSTEM 750 XTR Table of Contents 750-407/040-000 2DI 220V DC 3.0ms XTR Pos : 5 /D okumentati on allgemein/Verzeic hnisse/Inhalts verz eichnis - Ü berschrift oG und Verzei chnis @ 3\mod_1219151230875_21.doc x @ 21063 @ @ 1 Table of Contents Notes about this Documentation .............
  • Page 4 Table of Contents WAGO-I/O-SYSTEM 750 XTR 750-407/040-000 2DI 220V DC 3.0ms XTR Connect Devices ..................36 ® Connecting a Conductor to the CAGE CLAMP ........36 Connection Examples ................37 6.2.1 2-Conductor Connection ..............37 6.2.2 3-Conductor Connection ..............37 6.2.3...
  • Page 5: Notes About This Documentation

    Pos : 10 /Serie 750 ( WAGO-I/O-SYST EM)/Hi nweis e z ur D okumentati on ( alte Struktur)/Gül tigkeits ber eich/Gültig kei tsbereic h D okumentati on I/O-Modul 750-xxxx, ohne Variantenang abe @ 14\mod_1358944037947_21.doc x @ 109346 @ @ 1...
  • Page 6: Symbols

    Notes about this Documentation WAGO-I/O-SYSTEM 750 XTR 750-407/040-000 2DI 220V DC 3.0ms XTR Pos : 12.4 /All e Seri en ( Allgemei ne Module)/Ü bers chriften/Ebene 2/Symbol e - Ü berschrift 2 @ 13\mod_1351068042408_21.doc x @ 105270 @ 2 @ 1 Symbols Pos : 12.5.1 /All e Serien ( Allgemei ne Module)/Sicherheits- und sons tige Hi nweis e/Gefahr/Gefahr: _War nung vor Pers onenschäden allgemei n_ - Erläuter ung @ 13\mod_1343309450020_21.doc x @ 101029 @ @ 1...
  • Page 7: Number Notation

    WAGO-I/O-SYSTEM 750 XTR Notes about this Documentation 750-407/040-000 2DI 220V DC 3.0ms XTR Additional Information: Refers to additional information which is not an integral part of this documentation (e.g., the Internet). Pos : 12.6 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Pos : 12.7 /All e Seri en ( Allgemei ne Module)/Ü...
  • Page 8: Important Notes

    Pos : 15.6 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen (al te Str uktur)/Besti mmungsg emäß e Ver wendung/Besti mmungsgemäße Ver wendung 750- xxxx für Geräte - STD - mi t EN 61000-6- 3 @ 3\mod_1224064151234_21.doc...
  • Page 9: Technical Condition Of Specified Devices

    These modules contain no parts that can be serviced or repaired by the user. The following actions will result in the exclusion of liability on the part of WAGO Kontakttechnik GmbH & Co. KG: •...
  • Page 10: 2.1.4.1.2 Packaging

    Important Notes WAGO-I/O-SYSTEM 750 XTR 750-407/040-000 2DI 220V DC 3.0ms XTR Environmentally friendly disposal benefits health and protects the environment from harmful substances in electrical and electronic equipment. • Observe national and local regulations for the disposal of electrical and electronic equipment.
  • Page 11: Safety Advice (Precautions)

    WAGO-I/O-SYSTEM 750 XTR Important Notes 750-407/040-000 2DI 220V DC 3.0ms XTR Pos : 15.11 /Alle Serien (Allgemeine M odul e)/Übersc hriften/Ebene 2/Sicherheits hinweis e - Ü bers chrift 2 @ 6\mod_1260180299987_21.doc x @ 46724 @ 2 @ 1 Safety Advice (Precautions) Pos : 15.12 /Alle Serien (Allgemeine M odul e)/Sic herheits- und sonstige Hinweis e/Ei nlei tung Sic herheits hinweise Har dwar e @ 6\mod_1260180170493_21.doc x @ 46720 @ @ 1...
  • Page 12 Pos : null /Serie 750 (WAGO-I/O-SYST EM)/Wichtige Erläuter ung en (alte Str uktur)/Sic her hei ts- und s onstige Hi nweise/Ac htung/Ac htung: Ei nwandfrei e Kontakti erung z ur Tragsc hiene gewährleisten! @ 34\mod_1550481407638_21.doc...
  • Page 13 Pos : 15.17 /Serie 750 ( WAGO-I/O-SYST EM)/Wichtig e Erl äuter ung en (alte Struktur)/Sic her heits- und s onstige Hi nweis e/Ac htung/Ac htung: XTR - Is olationspr üfung en mit DC durchführen! @ 15\mod_1370843209441_21.doc...
  • Page 14: Device Description

    Pos : 18.4 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Ei nleitung/I/O-Besc hrei bung/Allgemein/Ver weis auf Kapi tel " Ger äte ans chli eßen" > " Ansc hluss beispi el(e)" @ 5\mod_1246015203281_21.doc x @ 36298 @ @ 1...
  • Page 15 Pos : 18.11 /Serie 750 ( WAGO-I/O-SYST EM)/Wichtig e Erl äuter ung en (alte Struktur)/Sic her heits- und s onstige Hi nweis e/Hi nweis/Hinweis: XTR - Max. I/O-M odul-Anz ahl beac hten! @ 16\mod_1372412268785_21.doc x @ 125110 @ @ 1...
  • Page 16: View

    Figure 1: View Pos : 22 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Ansic ht/Ansicht C ageClamp® _Legende mi t LEDs , mit 1 Entriegel ungslasc he @ 15\mod_1370867188922_21.doc x @ 122225 @ @ 1 Table 3: Legend for Figure “View”...
  • Page 17: Connectors

    Data Contacts/Local Bus Pos : 26.1 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Ansc hlüs se/Datenkontakte - Fel dbus koppl er/-c ontroller und Modul e – Abbildung und Besc hrei bung @ 3\mod_1231771259187_21.doc x @ 26002 @ @ 1 Communication between the fieldbus coupler/controller and the I/O modules as well as the system supply of the I/O modules is carried out via the local bus.
  • Page 18: Power Jumper Contacts/Field Supply

    750-407/040-000 I/O modules! Pos : 29.2 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen (al te Str uktur)/Sic herheits- und s onstige Hinweise/Vorsic ht/Vorsic ht: Verletz ungsgefahr durc h sc harfkantige M esser kontakte! @ 6\mod_1256193279401_21.doc x @ 43414 @ @ 1 Risk of injury due to sharp-edged blade contacts! The blade contacts are sharp-edged.
  • Page 19: Table 4: Legend For Figure "Power Jumper Contacts

    Pos : 29.6 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen (al te Str uktur)/Sic herheits- und s onstige Hinweise/Achtung/Ac htung: Maxi mal er Strom Eins peisung 750-0407/040- 000 @ 17\mod_1382014146271_21.doc x @ 134451 @ @ 1 Do not exceed maximum current via power contacts!
  • Page 20: Cage Clamp

    750-407/040-000 2DI 220V DC 3.0ms XTR Pos : 31 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Ansc hlüsse/CAGE CLAMP- Ans chl üss e - Ü bersc hrift 3 @ 6\mod_1256296337770_21.doc x @ 43674 @ 3 @ 1 ®...
  • Page 21: Display Elements

    Display Elements Pos : 35 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Anz eigeel emente/D I/Anz eigeelemente 750-04xx/0040- xxxx 2 DI ( Agn, Egn) neutral @ 16\mod_1372344724973_21.doc x @ 125066 @ @ 1 Figure 5: Display Elements Table 6: Legend for Figure “Display Elements”...
  • Page 22: Schematic Diagram

    750-407/040-000 2DI 220V DC 3.0ms XTR Schematic Diagram Pos : 39 /Serie 750 ( WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Sc hematische Sc hal tbilder/D I/Schematisc hes Sc haltbil d 750-0407/0040- xxxx @ 16\mod_1372347343961_21.doc x @ 125082 @ @ 1 Figure 6: Schematic Diagram Pos : 40 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...
  • Page 23: Technical Data

    Pos : 41 /All e Seri en (Allgemei ne Module)/Ü berschriften/Ebene 2/Tec hnische D aten - Ü bersc hrift 2 @ 3\mod_1232967587687_21.doc x @ 26924 @ 2 @ 1 Technical Data Pos : 42.1 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Technisc he Daten/VS (Variabl ensteuerung)/Technisc he Daten Ger ät ( VS) - XTR @ 15\mod_1369311215011_21.doc x @ 120260 @ 3 @ 1 3.6.1 Device Data Table 7: Technical Data –...
  • Page 24: Connection Type

    Follow the installation instructions Pos : 42.6 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Technisc he Daten/VS (Variabl ensteuerung)/Technisc he Daten kli matisc he U mwel tbedi ngungen (VS) - XTR @ 15\mod_1369387559187_21.doc x @ 120360 @ 3 @ 1 3.6.7...
  • Page 25: Approvals

     DOWNLOADS  Documentation  System Description. Pos : 45.2 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Zul ass ung en/Allgemein/Zul ass ung en I/O-Modul 750- xxxx Allgemei n, ohne Vari antenangabe - Einl eitung @ 4\mod_1237460656921_21.doc x @ 28643 @ @ 1 The following approvals have been granted to 750-407/040-000 I/O modules: Pos : 45.3 /All e Seri en ( Allgemei ne Module)/Z ulassungen/Standardz ulassungen/C E (Konformi täts kennz eichnung) @ 3\mod_1224494777421_21.doc x @ 24276 @ @ 1...
  • Page 26: Standards And Guidelines

    Standards and Guidelines Pos : 47.1 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Nor men und Richtlini en/Nor men und Richtlini en I/O-Modul 750- xxxx, ohne Vari antenangabe - Einl eitung @ 7\mod_1274278887584_21.doc x @ 56645 @ @ 1 750-407/040-000 I/O modules meet the following standards and guidelines: Pos : 47.2 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Nor men und Richtlini en/Allgemeine N or men XTR 2017 (AT EX und IECEx) @ 29\mod_1488294653976_21.doc x @ 410705 @ @ 1...
  • Page 27: Table 17: Climatic And Mechanical Environmental Conditions And

    WAGO-I/O-SYSTEM 750 XTR Device Description 750-407/040-000 2DI 220V DC 3.0ms XTR Table 17: Climatic and Mechanical Environmental Conditions and Shipbuilding Standard Test Value Transport EN 60870-2-2 Ct2(2k4) (except precipitation/water/moisture) Mechanical Environmental Conditions EN 61850-3 Achieved EN 60870-2-2 EN 60721-3-1 EN 60721-3-3...
  • Page 28: Table 18: Emc - Immunity To Interference

    Pos : 47.5 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Nor men und Richtlini en/EM V-Nor men I/O-M odul 750- xxxx/0040- 0000, nur Standar dversi on - Ei nlei tung XTR @ 18\mod_1395909426189_21.doc...
  • Page 29 10 m or more. Pos : 47.7 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Nor men und Richtlini en/Nor men Störauss endung XTR @ 18\mod_1394087664442_21.doc x @ 147358 @ @ 1 Manual Version 1.3.0...
  • Page 30: Table 19: Emc - Emission Of Interference

    Device Description WAGO-I/O-SYSTEM 750 XTR 750-407/040-000 2DI 220V DC 3.0ms XTR Table 19: EMC – Emission of Interference Standard Test Value Enclosure Emission of Interference • EN 61000-6-3 30 dB(µV/m), QP, 30 MHz … 230 MHz • EN 55032 Class B 37 dB(µV/m), QP, 230 MHz …...
  • Page 31: Table 20: Standards And Rated Conditions For Rail Applications (En 50155)

    EMC A or EMC B). Pos : 47.8 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung (alte Str uktur)/Nor men und Richtlini en/Nor men und Ei ns atz beding ung en für Bahnanwendungen (EN 50155) XTR @ 28\mod_1486482984774_21.doc x @ 405384 @ @ 1...
  • Page 32: Process Image

    Process Image Pos : 50 /Serie 750 ( WAGO-I/O-SYST EM)/Proz ess abbild Lokalbus/Hi nweis: Proz ess abbil dmappi ng abhängig von F BK/PFC , ohne Status-/Contr olbyte XTR @ 18\mod_1396511070508_21.doc x @ 150676 @ @ 1 Mapping of process data in the process image of fieldbus systems The representation of the process data of some I/O modules or their variations in the process image depends on the fieldbus coupler/controller used.
  • Page 33: Mounting

    I/O modules with fewer power contacts. Pos : 54.2 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen (al te Str uktur)/Sic herheits- und s onstige Hinweise/Vorsic ht/Vorsic ht: Verletz ungsgefahr durc h sc harfkantige M esser kontakte! @ 6\mod_1256193279401_21.doc x @ 43414 @ @ 1 Risk of injury due to sharp-edged blade contacts! The blade contacts are sharp-edged.
  • Page 34: Inserting And Removing Devices

    Pos : 54.10 /Serie 750 ( WAGO-I/O-SYST EM)/Wichtig e Erl äuter ung en (alte Struktur)/Sic her heits- und s onstige Hi nweis e/Ac htung/Ac htung: XTR nic ht unter -20 °C verdrahten oder umstec ken @ 15\mod_1367559895186_21.doc...
  • Page 35: Removing The I/O Module

    (if any) to the fieldbus coupler/controller or to the previous or possibly subsequent I/O module are established. Pos : 54.12 /Serie 750 ( WAGO-I/O-SYST EM)/Monti eren/D emonti eren/XTR-I/O-Modul entfernen @ 28\mod_1486551166032_21.doc x @ 405491 @ 3 @ 1 5.2.2 Removing the I/O Module Remove the I/O module from the assembly by pulling the release tab.
  • Page 36: Connect Devices

    Check if the voltage is positively isolated. Pos : 58 /Serie 750 ( WAGO-I/O-SYST EM)/Ans chli eßen/Leiter an C AGE C LAM P ans chli eßen ( allgemei n) - Übersc hrift 2 und Text @ 3\mod_1225448660171_21.doc x @ 24928 @ 2 @ 1 ®...
  • Page 37: Connection Examples

    Pos : 60 /All e Seri en (Allgemei ne Module)/Ü berschriften/Ebene 2/Ansc hluss beispi ele - Übersc hrift 2 @ 4\mod_1240996036328_21.doc x @ 32010 @ 2 @ 1 Connection Examples Pos : 61 /Serie 750 ( WAGO-I/O-SYST EM)/Ans chli eßen/Anschl uss beispi ele/Digitalei ngänge/Anschl uss beis pi ele 750- 040x_2D I_2L_3L_4L @ 14\mod_1358171764964_21.doc x @ 108600 @ 333 @ 1 6.2.1...
  • Page 38: 4-Conductor Connection

    Connect Devices WAGO-I/O-SYSTEM 750 XTR 750-407/040-000 2DI 220V DC 3.0ms XTR 6.2.3 4-Conductor Connection Figure 13: Connecting Diagram, 4-Conductor Connection Pos : 62 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.3.0...
  • Page 39: Use In Hazardous Environments

    Use in Hazardous Environments Pos : 63.2 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Ei ns atz ber eich Serie 750 @ 3\mod_1234272230203_21.doc x @ 27500 @ @ 1 The WAGO-I/O-SYSTEM 750 (electrical equipment) is designed for use in Zone 2 hazardous areas and shall be used in accordance with the marking and installation regulations.
  • Page 40: Marking Configuration Examples

    Marking for Europe According to ATEX and IECEx Pos : 63.6 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Beis piel bedruc kung ATEX und IEC Ex_TUEV07_2017 @ 14\mod_1360569228625_21.doc x @ 111294 @ @ 1 Figure 14: Marking Example According to ATEX and IECEx Figure 15: Text Detail –...
  • Page 41: Table 22: Description Of Marking Example According To Atex And Iecex

    WAGO-I/O-SYSTEM 750 XTR Use in Hazardous Environments 750-407/040-000 2DI 220V DC 3.0ms XTR Table 22: Description of Marking Example According to ATEX and IECEx Marking Description TUEV 07 ATEX 554086 X Approving authority resp. certificate numbers IECEx TUN 09.0001 X...
  • Page 42: Figure 16: Marking Example For Approved Ex I I/O Module According To

    750-407/040-000 2DI 220V DC 3.0ms XTR Pos : 63.8 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Beis piel bedruc kung ATEX und IEC Ex_TUEV12_Ex i_2017 @ 14\mod_1360569320118_21.doc x @ 111298 @ @ 1 Figure 16: Marking Example for Approved Ex i I/O Module According to ATEX and IECEx Figure 17: Text Detail –...
  • Page 43: Table 23: Description Of Marking Example For Approved Ex I I/O Module According To Atex And Iecex

    WAGO-I/O-SYSTEM 750 XTR Use in Hazardous Environments 750-407/040-000 2DI 220V DC 3.0ms XTR Table 23: Description of Marking Example for Approved Ex i I/O Module According to ATEX and IECEx Marking Description TUEV 12 ATEX 106032 X Approving authority resp. certificate numbers...
  • Page 44: Marking For The United States Of America (Nec) And Canada (Cec)

    Figure 18: Marking Example According to NEC Pos : 63.11 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Beispi elbedruc kung und Textdetail N EC 500_2017 @ 14\mod_1360580302684_21.doc x @ 111353 @ @ 1 Figure 19: Text Detail – Marking Example According to NEC 500...
  • Page 45: Figure 20: Text Detail - Marking Example For Approved Ex I I/O Module

    750-407/040-000 2DI 220V DC 3.0ms XTR Pos : 63.13 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Beispi elbedruc kung und Textdetail N EC 505_2017 @ 29\mod_1497865583500_21.doc x @ 424739 @ @ 1 Figure 20: Text Detail – Marking Example for Approved Ex i I/O Module According to NEC 505...
  • Page 46: Figure 22: Text Detail - Marking Example For Approved Ex I I/O Modules

    750-407/040-000 2DI 220V DC 3.0ms XTR Pos : 63.16 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Beispi elbedruc kung und Textdetail C EC_2017 @ 29\mod_1497865583297_21.doc x @ 424736 @ @ 1 Figure 22: Text Detail – Marking Example for Approved Ex i I/O Modules According to CEC 18...
  • Page 47: Installation Regulations

    Special Notes Regarding Explosion Protection Pos : 63.21.2 /Serie 750 ( WAGO-I/O- SYST EM)/Ei nsatz i n Ex-Bereic hen/Besonder e Hi nweis e hinsic htlic h Explosi onssc hutz_2017 @ 29\mod_1491556994025_21.doc x @ 415448 @ @ 1 The following warning notices are to be posted in the immediately proximity of the WAGO-I/O-SYSTEM 750 (hereinafter “product”):...
  • Page 48 Use in Hazardous Environments WAGO-I/O-SYSTEM 750 XTR 750-407/040-000 2DI 220V DC 3.0ms XTR Explosive atmosphere occurring simultaneously with assembly, installation or repair work must be ruled out. Among other things, these include the following activities • Insertion and removal of components •...
  • Page 49: Special Notes Regarding Ansi/Isa Ex

    Special Notes Regarding ANSI/ISA Ex Pos : 63.21.5 /Serie 750 ( WAGO-I/O- SYST EM)/Ei nsatz i n Ex-Bereic hen/AN SI/ISA gemäß U L Fil e E198726_2017 @ 29\mod_1491557259544_21.doc x @ 415451 @ @ 1 For ANSI/ISA Ex acc. to UL File E198726, the following additional requirements apply: •...
  • Page 50: List Of Figures

    List of Figures WAGO-I/O-SYSTEM 750 XTR 750-407/040-000 2DI 220V DC 3.0ms XTR Pos : 65 /D okumentation allgemei n/Verz eic hniss e/Abbil dungs verz eic hnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222916765_21.doc x @ 21080 @ @ 1 List of Figures Figure 1: View ....................16...
  • Page 51: List Of Tables

    WAGO-I/O-SYSTEM 750 XTR List of Tables 750-407/040-000 2DI 220V DC 3.0ms XTR Pos : 67 /D okumentation allgemei n/Verz eic hniss e/Tabell enverz eichnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222958703_21.doc x @ 21084 @ @ 1 List of Tables Table 1: Number Notation ...................
  • Page 52 Pos : 69 /D okumentation allgemei n/Einband/Einband - Leers eite für durc h 2 teilbare Seitenz ahl (Standarddruc k) @ 3\mod_1219230851078_0.doc x @ 21123 @ @ 1 Pos : 70 /D okumentation allgemei n/Einband/Einband R üc ks eite - alle D okumente; CI 2017 @ 28\mod_1486477503580_21.doc x @ 405394 @ @ 1 WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 •...

This manual is also suitable for:

2di 220v dc 3.0ms xtr

Table of Contents