Table 56: "Settings" Menu Item - WAGO 750-451 Manual

WAGO-I/O-SYSTEM 750
750-451 8 AI RTD

Table 56: "Settings" Menu Item

Option
Sensor type selection
Sensor type
Connection type selection
Connection type
Display of status information (diagnostic functions)
Global enable diagnostic
functions
Indicate wire break
Indicate short circuit
Indicate group error
Indicate measuring
range overflow
Indicate measuring
range underflow
Description
Ni100 [DIN 43760]
Ni120 [Minco]
−50 C ... 150 °C
Ni1000 [TK 61180,
DIN 43760]
−60 °C ... 250 °C
−50 °C ... 150 °C
Ni1000 [TK 5000
(Landis+Staefa)]
−60 °C ... 250 °C
−200 C ... 850 °C
Pt100 [IEC 751]
−50 °C ... 150 °C
Pt200 [IEC 751]
Pt500 [IEC 751]
−200 C ... 850 °C
Pt1000 [IEC 751]
−50 C ... 150 °C
Resistance measurement 1
Resistance measurement 2
Disabled
2-wire
The diagnostic functions are enabled globally and are indicated

in the status byte. At least one of the following diagnostic
functions must also be individually enabled again.
The diagnostic functions are disabled globally.

The "Wire break" diagnostic function is enabled and indicated in

the status byte.
The "Wire break" diagnostic function is not indicated.

The "Short circuit" diagnostic function is enabled and indicated

in the status byte.
The "Short circuit" diagnostic function is not indicated.

The "Group error (general error)" diagnostic function is enabled

and indicated in the status byte.
The "Group error" diagnostic function is not indicated.

The "Measuring range overflow" diagnostic function is enabled

and indicated in the status byte.
The "Measuring range overflow" diagnostic function is not

indicated.
The "Measuring range underflow" diagnostic function is enabled

and indicated in the status byte.
The "Measuring range underflow" diagnostic function is not

indicated.
Commissioning 77
These sensor types can be
selected per channel.
The channel is disabled.
The channel uses 2-wire
connection technology.
Manual
Version 1.2.0